Dolt System Variables#

Table of contents#

General system setting variables#

dbname_default_branch#

This system variable controls a database’s default branch, defaulting to the checked out branch when the server started. For a database named mydb, this variable will be named mydb_default_branch. New sessions will connect to this branch by default.

dolt_log_level#

This system variable controls logging levels in the server. Valid values are error, warn, info, debug, or trace. This value overrides whatever was specified on the command line for doltgres or in the config.yaml file.

dolt_show_branch_databases#

When set to 1, this system variable causes all branches to be represented as separate databases in show databases, the information_schema tables, and other places where databases are enumerated. Defaults to 0, which means that by default branch-derived databases are not displayed (although they can still be used).

fresh=> SELECT datname FROM pg_database;
 datname
----------
 postgres
 fresh
(2 rows)

fresh=> SET dolt_show_branch_databases TO 1;
SET
fresh=> SELECT datname FROM pg_database;
 datname
-----------
 fresh
 fresh/b1
 fresh/main
 postgres
(4 rows)

dolt_show_system_tables#

When set to 1, this system variable causes all system tables to be shown in pg_tables and in information_schema.tables. Defaults to 0.

dolt_override_schema#

When set to a commit hash, branch name, or tag name, Dolt will map all table data to the schema at the specified commit, branch, or tag. This is useful when you have a query that runs with a specific schema, and you want to run it with data that has a different schema. For example, if you add a Birthdate column to the People table in the most recent commits in your database, you cannot reference that column in queries run against older commits. If you enable schema overriding, and set dolt_override_schema to a commit that contains the Birthdate column, you can run the same query with recent commits and with older commits, without having to modify the query for the schema changes in the older commits. Dolt will map the table data to the schema at the specified commit, branch, or tag, and fill in the missing columns with NULL values.

-- check out an older branch that has a different schema
SELECT dolt_checkout('olderBranch');

-- running a query that references the Birthdate column will fail
SELECT Name, Birthdate FROM People;
column "Birthdate" could not be found in any table in scope

-- turning on schema overriding allows us to automatically map our data to the schema at the specified commit
SET dolt_override_schema TO 'main';
SELECT Name, Birthdate FROM People;
 Name      | Birthdate
-----------+-----------
 Billy     | NULL
 Jimbo     | NULL
(2 rows)

Note that when this session variable is set, the active Doltgres session becomes read-only. To disable schema overriding, simply set this variable to NULL.

dolt_transaction_commit#

When set to 1, this system variable creates a Dolt commit for every SQL transaction commit. Defaults to 0. Commits have a standard commit message (“Transaction commit”), unless dolt_transaction_commit_message has been set.

dolt_transaction_commit_message#

When dolt_transaction_commit is enabled, if this system variable is set to a string, it will be used as the message for the automatic Dolt commit. Defaults to NULL, which means automatic Dolt commits will use their standard commit message (“Transaction commit”).

dolt_allow_commit_conflicts#

When set to 1, this system variable allows transactions with merge conflicts to be committed. When set to 0, merge conflicts must be resolved before committing a transaction, and attempting to commit a transaction with conflicts fails and rolls back the transaction. Defaults to 0.

dolt_force_transaction_commit#

When set to 1, this system variable ignores all merge conflicts, constraint violations, and other correctness issues resulting from a merge and allows them to be committed. Defaults to 0.

Replication variables#

dolt_replicate_to_remote#

This system variable should be set on replication primaries to name a remote to replicate to. See Replication.

select name from dolt_remotes;
 name
---------
 remote1
 origin
(2 rows)

SET dolt_replicate_to_remote TO remote1;
SELECT dolt_commit('-am', 'push on write');

dolt_async_replication#

This system variable can be set to 1 on replication primaries to make remote pushes asynchronous. This setting can cause commits to complete faster since the push to remote is not synchronous, but it may also increase the remote replication delay. See Replication.

SET dolt_replicate_to_remote TO remote1;
SET dolt_async_replication TO 1;

dolt_read_replica_remote#

This system variable is set on read replicas to name a remote to pull from. New data is pulled every time a transaction begins.

Setting either dolt_replicate_heads or dolt_replicate_all_heads is also required for read replicas. See Replication.

SET dolt_read_replica_remote TO origin;
SET dolt_replicate_heads TO main;
START TRANSACTION;

dolt_replicate_all_heads#

This system variable indicates to pull all branches on a read replica at transaction start. Pair with dolt_read_replica_remote. Use is mutually exclusive with dolt_replicate_heads. See Replication.

SET dolt_replicate_all_heads TO 1;

dolt_replicate_heads#

This system variable specifies which branch heads a read replica will fetch. The wildcard * may be used to match zero or more characters in a branch name and is useful for selecting multiple branch names. Pair with dolt_read_replica_remote. Use is mutually exclusive with dolt_replicate_all_heads. See Replication.

SET dolt_replicate_heads TO main;
SET dolt_replicate_heads TO 'main,feature1,feature2';
SET dolt_replicate_heads TO 'main,release*';

dolt_replication_remote_url_template#

This system variable indicates that newly created databases should have a remote created according to the URL template supplied. This URL template must include the {database} placeholder. Some examples:

set dolt_replication_remote_url_template TO 'file:///share/doltRemotes/{database}'; -- file based remote
set dolt_replication_remote_url_template TO 'aws://dynamo-table:s3-bucket/{database}'; -- AWS remote
set dolt_replication_remote_url_template TO 'gs://mybucket/remotes/{database}'; -- GCP remote

On a read replica, setting this variable will cause the server to attempt to clone any unknown database used in a query or connection string by constructing a remote URL and cloning from that remote. See Replication.

dolt_read_replica_force_pull#

Set this variable to 1 to cause read replicas to always pull their local copies of remote heads even when they have diverged from the local copy, which can occur in the case of a select dolt_push('-f'). A setting of 0 causes read replicas to reject remote head updates that cannot be fast-forward merged into the local copy. Defaults to 1.

dolt_skip_replication_errors#

Set this variable to 1 to ignore replication errors on a read replica. Replication errors will log a warning rather than causing queries to fail. Defaults to 0.

SET dolt_skip_replication_errors TO 1;

Session metadata variables#

dbname_head_ref#

Each session defines a system variable that controls the current session head. For a database called mydb, this variable will be called mydb_head_ref and be set to the current head.

mydb=> select mydb_head_ref;
mydb_head_ref
------------------
refs/heads/main
(1 row)

You can set this session variable to switch your current head. Use either refs/heads/branchName or just branchName:

SET mydb_head_ref TO 'feature-branch'

This is equivalent to:

select dolt_checkout('feature-branch')

dbname_head#

This system variable reflects the current HEAD commit’s hash. For a database called mydb, this variable will be called mydb_head. It is read-only.

dbname_working#

This system variable reflects the current working root value’s hash. For a database called mydb, this variable will be called mydb_working. Its value corresponds to the current working hash. Selecting it is useful for diagnostics. It is read-only.

dbname_staged#

This system variable reflects the current staged root value’s hash. For a database called mydb, this variable will be called mydb_staged Selecting it is useful for diagnostics. It is read-only.